1953 MG TD - Safety inspection and mechanical work

• Arrival and cleanup - 8 pictures

1977 Lotus Esprit - Mechanical work

• Tearing into the carbs - 5 pictures
• Carbs back on and car corner-weighed - 5 pictures

1970 Jaguar XKE - Mechanical Service

• Beginning A/C removal - 5 pictures
• Beginning the valve adjustments - 6 pictures
• New exhaust manifolds - 5 pictures
• Installing the stainless exhaust- 5 pictures

1978 MGB - Transmission/clutch work

• Engine removal - 7 pictures
• Disassembling the transmission - 6 pictures
• Broken synchro and transmission reassembly - 7 pictures
• Engine and transmission reinstallation - 6 pictures
• Undercoating - 5 pictures

1975 MGB Roadster - Rust repair, Paint and Reassembly

• Disassembly and Rust Damage - 5 pictures
• Rust repair and paint prep - 5 pictures
• Painted, beginning reassembly - 7 pictures
• Reassembly, day 2 - 7 pictures
• Completed reassembly - 6 pictures

MGA w/ MGB Driveline - Body/Chassis repair, partial assembly

• Building the Rolling Chassis - 8 pictures
• Body on chassis, ready to go home- 4 pictures

MG Midget- Rust Repair

• Frame horn repair - 6 pictures

1973 MGB/GT - Floor Replacement/Rust Repair

• Rust damage - 7 pictures
• Damage removal and beginning repairs - 5 pictures
• Installing the sill membrane- 5 pictures
• Inner sill / castle replacement - 6 pictures
• Wheelhouse repairs - 4 pictures
• Completed wheelhouse repairs - 6 pictures
• Spring Perch Repairs - 6 pictures
• Completed repairs with Miata seats installed - 4 pictures

1973 MGB/GT - Gear-Reduction Starter

• Installing the starter - 6 pictures

1973 MGB/GT - Repairing the rear brakes

• Assessing the damages - 4 pictures
• Rebuilding the rear brakes - 6 pictures

MGA 1600 Chassis - Sheetmetal Restoration

• After Sandblasting - 4 pictures

MGA Twin Cam - Sheetmetal Restoration

• Arrival - 6 Picturess
• Removing body from frame - 5 Pictures
• Chassis back from sandblasting- 7 Pictures
• Body back from sandblasting - 4 Pictures
• Body detail - 6 Pictures
• Chassis on the jig - 5 Pictures
• Cutting into the chassis - 5 Pictures
• Fitting the new front chassis section- 5 Pictures
• Welding in the new section- 5 Pictures
• Round tube crossmember repair - 4 Pictures
• Chassis underside detail - 3 Pictures
• Steering rack mounts - 6 pictures
• Motor mounts - 6 pictures
• Round tube crossmember - 5 pictures
• Battery trays - 5 pictures
• Crossmember holes - 7 pictures
• liackets and tabs- 4 pictures
• Clipping the nose - 4 pictures
• Removing inner fenders - 5 pictures
• Inner fender mock-up - 3 pictures
• Inner fender modifications- 8 pictures
• More inner fender modifications- 7 pictures
• Making the radiator liackets - 6 pictures
• Body on frame - 7 pictures
• Access panel fender modifications - 6 pictures
• Front shroud repair piece faliication - 6 pictures
• Front shroud repair - 5 pictures
• Left front shroud repair - 6 pictures
• Finishing the front end repairs - 6 pictures
• Inner fender welding - 4 pictures
• Left-hand inner sill and dogleg repair- 6 pictures
• Left-hand sill install - 3 pictures
• B-pillar repair - 4 pictures
• Right-hand sill repairs- 6 pictures
• Right-hand A and B-pillar repair - 4 pictures
• Prepping the left-hand rocker- 5 pictures
• Left-hand dogleg repairs- 5 pictures
• Prepping the right-hand rocker - 4 pictures
• Right-hand rocker install and dogleg repair - 6 pictures
• Headlight ring repairs- 5 pictures
• Front valance skirt panel installation - 3 pictures
• Fitting the bumper and grille - 4 pictures
• Nearly done - 6 pictures
• Chassis and suspension powdercoating - 5 pictures
• Rolling chassis assembly - 4 pictures
• Rolling chassis finished - 7 pictures
• Oil cooler mounting holes - 2 pictures
• Body on frame - 4 pictures

• Before & After - 8 Pictures
• Arrival and disassembly - 6 Pictures
• A-pillar rust repairs - 6 Pictures
• More A-pillar rust repairs - 7 Pictures
• Beginning the fender work - 5 Pictures
• More fender work - 7 Pictures
• Back from the paint shop - 4 Pictures
• Reassembly begins - 4 Pictures
• Completed reassembly - 5 Pictures

• Arrival- 5 Pictures
• Frame rail repairs - 6 Pictures
• Crossmember and floorboard rail repairs- 5 Pictures
• Paint and floorboard installation - 5 Pictures

• Start of assembly- 4 Picturess
• Continuing assembly- 5 Pictures
• Headliner and glass installed - 7 Pictures
Front-end mockup - 3 Pictures

• Start of chassis work- 4 Pictures
• Body off chassis - 4 Pictures
• Chassis disassembly - 6 Pictures
• Back from the sandblaster - 5 Pictures
• Mock-Up - 4 Pictures
• Removing the battery tray - 6 Pictures
• Installing a new battery tray - 4 Pictures
• Dogleg repairs - 7 Pictures
• Sill repairs - 6 Pictures
• Left side sill and dogleg repairs - 6 Pictures
• More sill and dogleg repairs - 7 Pictures
• Floor removal - 6 Pictures
• Floor replacement - 7 Pictures

• Start of chassis work- 4 Pictures
• Right side of chassis - 4 Pictures
• Chassis crossmember repairs - 5 Pictures

• Start of project - 5 Pictures
• Body off Chassis - 5 Pictures
• Replacement body - 4 Pictures
• Body on jig - 5 Pictures
• Chassis repairs - 5 Pictures
• Battery mount repairs - 4 Pictures
• Finished chassis - 5 Pictures
• Coupe window repair - 3 Pictures
• Trunk floor replacement - 6 Pictures
• Sill removal - 4 Pictures
• Inner sill/inner dogleg repair - 4 Pictures
• A-Pillar repair - 4 Pictures
• Installation of sill plates- 4 Pictures
• Inner sill prep and installation - 5 Pictures
• Radiator duct panel replacement- 6 Pictures
• Grille surround repairs - 4 Pictures
• More front-end work - 4 Pictures
• Fitting the grille - 4 Pictures
• Rear valance repairs - 5 Pictures
• Passenger door skin - 4 Pictures
• Driver door skin - 6 Pictures
• Powdercoated chassis - 5 Pictures
• Painted body - 5 Pictures
• Rolling chassis - 5 Pictures
• Body back on the frame - 5 Pictures

• Start of project - 6 Pictures
• Disassembly - 5 Pictures
• Paint removed - 6 pictures
• Right side sills & floor cut away - 4 Pictures
• Inner sill installed - 4 Pictures
• Outer sill installed - 4 Pictures

• After sandblasting - 5 pictures
• Frame Extension - 4 pictures

• Start of project - 3 Pictures
• Frame repairs - 7 Pictures
• Rear Panel (English Wheel) - 4 Pictures

• Start of project - 4 pictures
• Engine swap details - 5 pictures
• More swap details - 4 pictures
• Engine compartment views - 3 pictures
• Underside - 4 pictures
• Dyno Results - 2 graphs
• Wiring - 5 pictures
• Exterior assembly - 4 pictures
• Completed interior - 5 pictures
• Completed exterior - 3 pictures

MG Midget - Supercharger installation

• New wheels - 4 Pictures
• Removing the cylinder head - 6 Pictures
• The supercharger has arrived - 3 Pictures
• cc'ing the head- 6 Pictures
• Installing the supercharger - 7 Pictures
• Finishing up - 5 Pictures

MGA Sebring Race Car - Chassis Restoration

• Starting the project- 4 pictures
• Back from sandblasting - 4 pictures
• Beginning frame repairs - 3 pictures
• Right-hand main channel repairs - 4 pictures
• Left-hand main channel repairs - 3 pictures
• Chassis on jig - 4 pictures
• Completed chassis- 5 pictures

• Starting the project- 4 pictures
• Engine bay disassembly - 4 pictures
• Cleaning the engine bay - 6 pictures
• Painting the engine and engine bay - 7 pictures
• Engine bay reassembly - 5 pictures
• Installing the supercharger - 8 pictures
• Dyno testing - 3 pictures

• Arrival- 5 Pictures
• Removing the fenders - 5 Pictures
• Getting ready for the frame shop- 4 Pictures
• Rear fender repairs - 5 Pictures
• Stripping paint and fitting fenders - 5 Pictures
• Back from frame shop/new springs - 5 Pictures
• Cowl repairs - 4 Pictures
• More cowl repairs and bonnet louvers - 6 Pictures
• Back from the paint shop - 4 Pictures
• Reassembly begins - 6 Pictures
• Continuing the reassembly - 4 Pictures
• Finished - 4 Pictures
• Back on the track! - 4 Pictures

• Start of project - 4 Pictures
• Right side of chassis (before) - 4 Pictures
• Left side of chassis (before) - 3 Pictures
• Left side of chassis repaired - 4 Pictures
• Right side and misc chassis repairs - 4 Pictures
• Paint stripped from body tub - 4 Pictures
• Details of rust and collision damage on tub - 6 Pictures
• Left side inner sill repairs - 4 Pictures
• Right side B-pillar repairs - 7 Pictures
• Front wheelhouse repairs - 6 Pictures
• Installing sills - 4 Pictures
• Installing rocker panels - 4 Pictures
• Rear collision damage repair- 4 Pictures
• Rear fender repair- 4 Pictures
• Front fender repair- 2 Pictures
• Finished- 4 Pictures

• Start of project - 4 Picture
• Body removal - 4 pictures
• Paint removal - 6 pictures
• Chassis repairs - 5 pictures
• Trunk lid repairs - 5 pictures
• Trunk floor repairs - 3 pictures
• Sills cut off - 4 pictures
• New sills installed - 4 pictures
• Rocker panels- 6 pictures
• Front collision repair- 4 pictures
• Radiator duct panel - 3 pictures
• Rear fender repairs - 3 pictures
• Upper grille surround repair - 3 pictures
• Lower grille surround repair - 7 pictures
• Rear valence repair - 4 pictures
• Body test fit to chassis - 3 pictures
• Fitting front valence - 5 pictures
• Finished, ready for paint - 5 pictures
• Being painted - 4 pictures
• Painted body shell and parts - 4pictures
• Start of chassis assembly - 4 pictures
• Chassis assembled - 4 pictures
• Body on chassis - 5 pictures
• Doors and fenders installed- 5 pictures
• Underside of car - 5 pictures

• Start of project - 4 Pictures
• Frame - 3 Pictures
• Body tub on jig - 4 Pictures
• Door Repairs - 4 Pictures
• Sill Repairs - 4 Pictures
• Rocker Panel Fitting - 6 Pictures
• Painted body back on chassis - 4 Pictures

• Start of project - 4 pictures
• Cutting the roof - 5 pictures
• Fitting the roof - 6 pictures
• C-Pillar repairs - 3 pictures
• A-Pillars/Finished - 4 pictures

• Start of project - 4 Pictures
• Removing roll bar mounts- 4 pictures
• Rear frame rail repairs- 3 pictures
• Battery mount/misc repairs - 4 pictures
• Finished - 4 pictures

• Start of project - 4 Pictures
• Replacement Body Tub - 4 Pictures
• Trunk floor removal- 3 Pictures
• Trunk floor replacement - 4 Pictures
• Nearly finished - 3 pictures
• Finished Fenders - 4 Pictures
• Door and Fender details - 4 Pictures
• Interior Areas - 3 Pictures
• Ready for paint- 3 Pictures
• Powdercoated chassis - 3 Pictures
• Painted body - 4 Pictures

• Start of project - 4 Pictures
• Body removal - 3 pictures
• Start of sill repairs - 5 pictures
• Inner dogleg/B-pillar repairs - 6 pictures
• Rocker panel/sill removal - 3 pictures
• Inner sill repairs - 5 pictures
• Rear dogleg repairs - 4 pictures
• Front fender repairs - 7 pictures
• Front end details - 3 pictures
• Almost done - 4 pictures

• Start of project - 4 Pictures
• Main channel repair - 5 Pictures
• Square crossmember - 5 Pictures
• Round crossmember - 3 Pictures
• Nearly finished - 3 Pictures
• Front extension repairs - 5 Pictures

• Start of project - 4 Pictures
• Rear dogleg repairs - 4 pictures
• Front inner sill repairs - 4 pictures
• Front fender repairs - 4 pictures
• Painted (at bodyshop) - 3 pictures
• Back at the Shop - 3 pictures
• Start of reassembly - 3 pictures
• Finished car - 5 pictures

• Start of project - 3 pictures
• Rear valence replacement - 4 pictures
• Left floor replacement - 4 pictures
• Front Inner A-pillar repair - 4 pictures
• Front End sheet metal test fit- 4 pictures
• Almost Done- 4 pictures

• Start of project - 4 Picture
• Paint stripped, ready for repair - 5 Pictures
• Sills cut off - 5 Pictures
• Sills installed - 4 Pictures
• B Pillar Repaired - 3 Pictures
• Making front patch panel - 4 Pictures
• Installing front fender patch panel - 3 Pictures
• Repairing headlight area- 3 Pictures
• Louvering the hood - 3 Pictures
• Ready for paint - 4 Pictures
• Painted and back on chassis - 5 Pictures
• Fitting fenders - 4 Pictures

1932 Ford Pickup Truck - Hot Rod build

• Start of the project - 5 pictures
• Removing the engine - 3 pictures
• Cab off - 4 pictures
• Cab work - 6 pictures
• Engine in - 4 pictures
• Back together - 5 pictures
• Working on the bed - 6 pictures

1936 Ford Hot Rod- Improving driveability and reliability

• Replacing the starter - 4 pictures
• Beginning the rear-end work - 5 pictures
• Removing the rear axle - 6 pictures
• Rear-end Mockup - 4 pictures
• Testing wheels and tires - 6 pictures
• Beginning the pedal mods and firewall repairs - 7 pictures
• Continuing the firewall repairs - 5 pictures
• Upgrading the front brakes for the new wheels - 5 pictures
• New wheels and tires - 7 pictures
• Old vs. New look - 6 pictures
• Insulating the passenger compartment - 5 pictures
• More insulation - 4 pictures
• Finishing the insulation - 5 pictures
• Wrapping up the firewall repairs - 7 pictures
• New carb and air cleaner - 4 pictures
• New pipes and away she goes - 5 pictures
• Replacing the running board covers - 5 pictures
• More running board cover work - 5 pictures
• Beginning rear bumper work - 5 pictures
• Removing the rear bumper - 5 pictures
• Re-covering the running boards - 5 pictures
• Continuing the re-cover - 6 pictures
• Mocking up the new bumper brackets - 5 pictures
• Refitting the running boards- 5 pictures

1932 Ford Roadster - Hot Rod build

• Starting with the chassis - 7 pictures
• Fitting the body - 7 pictures

1929 Model A Ford Hot Rod

• Finished car - 3 pictures
• Details - 5 pictures
• Intake and Header - 2 pictures
• Interior - 4 pictures

1934 Ford Coupe Hot Rod

• Mechanical updates, fit hood, paint flames - 5 pictures

1937 Continental Motors - Mechanical work

• Arrival - 8 pictures

1934 Continental - Sheetmetal Restoration

• Grille and Car - 4 Pictures
• After sandblasting- 5 Pictures
• Dogleg repairs - 5 Pictures
• Hammerform parts - 5 Pictures
• More dogleg repairs - 4 Pictures
• Trunk floor repairs - 5 Pictures
• Repairing the wheelwells - 5 Pictures
• Front fender repair - 6 Pictures
• Rear fender repair - 5 Pictures
• Ready to go home - 4 Pictures

1937 Chevy - Sheet metal restoration

• Start of project - 5 pictures
• Trunk floor replacement - 4 pictures
• More trunk floor replacement - 3 pictures
• Tailpan replacement - 6 pictures
• Rear corner replacement - 6 pictures
• Floor Repairs - 6 pictures

1914 Cadillac - Build splash aprons

• Semi-assembled car - 4 Pictures
• Splash apron details - 6 Pictures
• Fitting splash aprons - 4 Pictures

Pre-War Sprint Car - Build hood, grille, exhaust

• As it arrived - 4 pictures
• After completion - 4 pictures

Hood and tail modifications - 5 pictures

1978 Ferrari 308 GTS - Mechanical work

• Changing the carb jets - 8 pictures

1955 VW Beetle (Oval Window with Sunroof)

• Rear quarter panel repair - 3 pictures
• Rear apron replacement - 4 pictures
• Front quarter panel repair - 4 pictures

Patch Panels -Misc. panels built from scratch

Kid's Pedal Tractor - Restoration and flames